Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Silver Spring, MD

Efflorescence Removal for Pavers in Silver Spring, MD

Pressure wash with a surface cleaner for pavers. Removing white, chalky salt deposits from brick, pavers, concrete and stone. Typical cost $200-$600.

Efflorescence Removal for Pavers is one of the jobs we do most often in Silver Spring, MD. Typical jobs cost $200-$600, and you approve the price before we begin. For pavers, that means pressure wash with a surface cleaner.

How we clean it

Pressure wash with a surface cleanerCleaning method
Usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possiblePressure

Cleaning solution: A paver cleaner or pre-treatment; efflorescence needs a dedicated cleaner.

Cleaning pavers safely

Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them. Re-sanding the joints, often with polymeric sand, and sealing afterward keeps weeds and ants out and holds the pavers in place.

Avoid: A narrow tip aimed into the joints, which blows out sand and can loosen pavers.

How often: Clean every 1-2 years; reseal every 2-4 years.

Signs you need efflorescence removal for pavers

  • White powder or crust on brick, block or pavers
  • Haze that comes back after rain
  • White lines along mortar joints

Why it gets dirty

  • Water moving through masonry and carrying salts to the surface
  • New pavers and concrete still curing
  • Downspouts and sprinklers soaking the masonry

Easy upkeep between cleanings

  • Brush dry efflorescence off with a stiff brush before wetting it
  • Fix water sources such as gutters and sprinklers
  • Wait out new installations: efflorescence on new pavers often fades on its own

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

What can go wrong with DIY pressure washing

  • Washing with plain water, which can dissolve salts and redeposit them
  • Strong acids that burn masonry
  • Sealing over efflorescence, which traps it

Our process for efflorescence removal for pavers

  1. Find the moisture source
  2. Dry-brush loose salts
  3. Apply an efflorescence cleaner
  4. Rinse and neutralize
  5. Seal only once the surface is clean and dry

How much does efflorescence removal for pavers cost?

$200-$600Typical range for a typical wall, patio or walkway
1-3 hoursTypical time on site
As needed; it can return until the moisture source is fixedRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for pavers

Efflorescence Removal for Pavers in Silver Spring, MD

Rust from sprinklers and fertilizer, leaf tannin stains in the fall, and salt residue in the spring are the most common stains on Maryland driveways and walkways.

Crews serve all of Silver Spring (ZIP codes 20901, 20902, 20903, 20904, 20905 and more), plus Georgia Avenue / Walter Reed, DC (0.6 mi), The Parks At Walter Reed, DC (1.2 mi), Takoma Park (1.3 mi) and Brightwood, DC (2 mi). Call (555) 010-0000 for a free quote in Silver Spring.

Efflorescence Removal for Pavers: frequently asked questions

How much does efflorescence removal for pavers cost in Silver Spring, MD?

Efflorescence Removal for Pavers typically costs $200-$600 for a typical wall, patio or walkway, and usually takes 1-3 hours. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for efflorescence removal for pavers?

For pavers: usually 1,500-3,000 PSI with a surface cleaner, adjusted to keep joint sand in place where possible. What we avoid: a narrow tip aimed into the joints, which blows out sand and can loosen pavers. We keep the pressure even and controlled, with the right tools for the surface.

Is efflorescence removal for pavers safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule efflorescence removal for pavers?

Clean every 1-2 years; reseal every 2-4 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Silver Spring, MD

Exterior Window Cleaning

Exterior window cleaning, often done with a house wash, including frames, sills and screens.

Typical $150-$400

Roof Cleaning for Cedar Shake Roofs

Soft wash. Cedar shakes grow moss and lichen and turn gray as the wood weathers.

Typical $400-$1,000

Patio Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$400

Patio Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$400

Pool Deck Cleaning for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $200-$500

Exterior Mold & Mildew Removal for Fiber Cement Siding

Soft wash. Fiber cement siding is durable and holds paint well, but its factory finish can be marked by high pressure, and manufacturers' care guides generally recommend low-pressure cleaning.

Typical $250-$700

Rust Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$500

Driveway Cleaning

Driveway pressure washing that removes dirt, mildew, tire marks and many oil and rust stains for an even, clean finish.

Typical $150-$400

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$600

Soft Washing for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $300-$800

Pressure Washing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$600

Ready for a cleaner home or business?

Get a free pressure washing quote in Silver Spring, MD. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote